Home › Forum › Ask A Member › Evinrude Ignition Coil Test › Reply To: Evinrude Ignition Coil Test

#316680
Bob Wight
Participant

    US Member

    a break in the wire isn’t going to stop 10-15 ,000 volts if it can jump a plug gap !!      best to get a new coil before the inside arcing  finds a new route to ground  and you loose spark at the plug !!!

    Well, that certainly makes sense.   When I saw it tested open, I thought it best to just get a new coil, especially since this one appears to be the original OMC coil.   It has the original OMC number stamped on it which was superseded at some point.    The other coil which tested good is an obvious replacement as it is a German made Prufrex coil.

    Bob

    1937 Champion D2C Deluxe Lite Twin
    1954 Johnson CD-11
    1955 Johnson QD-16
    1957 Evinrude Fastwin 18
    1957 Evinrude 3022
    1958 Johnson QD-19
    1958 Johnson FD-12
    1959 Johnson QD-20
    1982 Evinrude 25hp

    “Every 20 minute job is only a broken bolt away from a 3-day project.”
    "Every time you remove a broken or seized bolt an angel gets his wings."