Home › Forum › Ask A Member › 1926 Evinrude NS Sportwin › Reply To: 1926 Evinrude NS Sportwin
I started refurbishing the magneto today. I forgot to take pics. I will add some tomorrow when I resume.
David…..Can you post pics and text showing how you went about removing the Bendix laminates? Thanks! Great project there!
Chuck
Chuck,
I didn’t take any pictures of this process. Basically what I did is cut the laminates off close to the coil with a hack saw. Then drill down through the laminate as far as you dare. I used my trusty Walker-Turner drill press. Then get a long punch that fits the hole and drive the center laminates out. Sometimes they come easy, sometimes not! Then just work at the remaining laminates to get them out.
People seem to be getting better at the process. Looking back over older posts on here regarding the laminate removal on Bendix coils seems to indicate a high frustration rate and an even higher failure rate. I had been thinking it was essentially impossible.
Your success along with o couple of other posters seems to indicate that skills are getting honed a bit.
I wonder if all of the Bendix style coils available for sale today are created equal in this respect? Maybe there was more than one supplier for the so-called “Military Style” coil?
I think you are correct. I have had a few of these coils that the laminates practically slipped right out. No rhyme or reason!
David Bartlett
Pine Tree Boating Club Chapter
"I don't fully understand everything I know!"