Re: Johnson TD-20: Looking for some input…

[xjfish]

Thanks very much for the replies and links! I removed the intake/exhaust manifold to clean and reseal it. I just received the "Mercruiser retrofit" style float. I plan on ordering those leather washers from Mr.Lautner if possible. I will plan on going through the carb completely and clean the entire fuel system for starters. I am aware that carb cleaner isn’t a very 2 stroke engine friendly fuel and it is not my usual practice to use it. Hopefully next time it fires, I can burn some 16:1 in a water tank… I’ll probably have a couple questions once I get into the carb, has been a little hectic lately and haven’t had much extra time to work on it. Thanks again for the help.