Reply To: Painting instruction lettering?

[RICHARD A. WHITE]

So, previously I would paint the whole dang thing, wait for it to cure completely then sand off the offending paint. Gets you a highly changed finish on the main part which may NOT be what you want.
Here is the challenge…If the lettering is not stamped with clean clear edges… the sanding of the part you don’t want paint on will show them and boy will it show them… I have also used a toothpick to “dab” paint into lettering such as that, VERY tedious and prone to mistakes…

http://www.richardsoutboardtools.com
classicomctools@gmail.com