Re: Help please with 1922 Ruddertwin restoration

[Monte NZ]

Thanks Tubs for your reply and the excellent photo.

Unfortunately my timer case is a bit different to yours, in that the brown insulation block (held with two brass nuts and screws through the bottom of the case on yours) was never in my setup.

There is only one hole with brass screw and nut through the bottom of my one ( and that is further to one side) which holds the condenser.

The other item not on mine, but is on yours, is the brass fitting at the front of the unit where the plug is, which makes me wonder if the plug on mine is not original………maybe there was a piece on the back of the plug which the stop button connected to for stopping the motor.

Thanks very much for your help once again, but it looks to me like there was quite a few modifications on the timers over the years.

I could make up something to do the trick, but I would like to keep it original if possible.

Cheers
MonteNZ