Home › Forum › Ask A Member › Where’s my adjustment? › Re: Where’s my adjustment?
If it’s like the omc motors I have ,there are two screws attaching that "brass plate’ to the magneto base. Loose those slightly , one will pivot,the other is the adjustment bolt. Adjust that brass plate so that the throttle linkage arm roller just starts to move when touching in between those 2 marks. You may put an alligator clip with a small piece of wire attached to it , bent at 90 degrees and attach it to the throttle shaft and give you a better visual aid on when the throttle shaft JUST begins to move when the roller is touching in between those 2 marks. Tighten bolts and recheck. It may take a couple tries to get it perfect.
"Some people want to know how a watch works, others just want to know what time it is"
Robbie Robertson