Reply To: Sealant or not on old NOS fiber gaskets?

[JACQUES]

if you service cracked coils may as well replace the plug wires  and boots   make certain you use only  solid/strand wire 7mm  which will give you 0 ohms  from coil end to boots..   Automotive wire  uses high resistance carbon wires to reduce emission of static noise  interference in theold am band radios. Tractor supply store, bike shops , small motor  shops use it and will likely sell you a few feet.

coil wise the 2  short primary wires have  1-2 ohms   and either wire should read 4-8 Kohms  with the high voltage pin.  when installing tuck wires under the coil away from the rotating cam.  1-2 drops of GC oil on the small felts.   Front coil goes to the top cyl.

 

 

Joining AOMCI has priviledges 🙂