I only see one photo. There should be an option to “insert into content” yhid will insert the photo into the body of the post. That’s the option I choose.
Everything in the photo you posted is correct for the F. It has the model F specific carb so I’m convinced this is likely an F wearing a 1922-23 fuel tank. The exhaust cut off on the side of the motor should look like a “peanut”. The timer should have wires out the front, but they were often changed to the newer style with the plug capped and the wires routed out the back. Photos below show examples.
So in short, you need a powerhead from a 1921 model F, 1922 (no letter designation) or 1923 model A. Lots of options. However, I would still try to free up the powerhead. You would be surprised how often they can be saved. It’s also easier to find a few parts than an entire powerhead. Good luck with your project.
Wayne
Upper Canada Chapter
uccaomci.com
