Reply To: Magneto Cam and Timming Tool Question

Home › Forum › Ask A Member › Magneto Cam and Timming Tool Question › Reply To: Magneto Cam and Timming Tool Question

January 13, 2026 at 2:20 pm #303356
Kent Cochran
Participant

    US Member

    Here are a few photos of the carburetor my motor has if this helps.

    The fuel filter and sediment bowl are separate form the Carb.  Yes, cleaned the filter and fuel does flow into the Carb. I have not removed the float bowl yet. The float was level when I rebuilt the Carb. This motor does not have a choke on the Carb. It does Have a Primer push button that is attached to the high speed fine tune knob. The butterfly does open and close correctly.

    Thanks, Everyone      This is as far as I have gotten in my troubleshooting at this time.

     

    Kent Cochran
    1949 10 hp Johnson QD-10
    1951 5 hp Johnson TN-27
    1952 10 hp Johnson QD-13
    1956 7.5 hp Evinrude 7520
    1957 7.5 hp Evinrude 7522