Doesn’t the picture show the coil’s green wires going to the proper points …under the coil passing by the condensers and attached to the points & condenser wire ?
Condensers are new but maybe they test bad.
No results yet on the front coil being wired to the top plug. Metallic strand wire used ?
what is the measured OHMS value from plug boots to engine frame ?
I have no diagram of parts on the QD13 but it is possible the carb is a bit strange compared to later year models
suggest you read up on early QD-FD carbs in the johnson service manual section.. page 117 and up a few
Joining AOMCI has priviledges 🙂
