Reply To: Magneto Cam and Timming Tool Question

Home › Forum › Ask A Member › Magneto Cam and Timming Tool Question › Reply To: Magneto Cam and Timming Tool Question

January 12, 2026 at 10:44 am #303287
JACQUES
Participant

    A 10$ VOM  ,   a simple  test bulb/led   or small piezo buzzer  with a  9v battery is really all one needs  for a perfect job.  Series connected to the points

    the bulb or buzzer going off will tell you when the points have openned…. just like a VOM does .  Adjust the point cam screw to line up the bars as per  the video.

     

    if one is lucky to have an old Telco KS  meter  you don’t even have to disconnect any wires… the small needle swing makes it clearly visible  when the points open.

    Joining AOMCI has priviledges 🙂