Home › Forum › Ask A Member › Boat Restoration Question › Re: Boat Restoration Question
It really depends on how you are going to finish the boat. If the repaired areas are going to be painted, the 5200 would be best for ease of use. If the boat is going to be clear finished so the wood is visible, you would want to use a clear epoxy mixed with matching wood flour or dust to help "blend" in the repair for the least visibility. I have a small Mahogany run about I built from scratch using Mahogany ply wood and dimensional lumber. I would save the fine dust created by my table saw in a baggie and use it to make epoxy paste to fill the screw and staple holes. On the seams, if this area is going to flex when pounding against waves you may want to use the paste and reinforce the seam with a 4oz. fiberglass deck cloth to reinforce the repair. When wetted out with epoxy, the cloth becomes invisible. 4oz. cloth can be purchased from Glen L. Just search Glen L boats and you will find the site.
There are 2 other wood boat builders on this site. Both moderator Travis and member GDcarpenter have built wooden Glen L boats as well and could also offer some tips for your restoration. Feel free to contact me if you have any other questions about your wood boat. I have built a few over the years and would be more then happy to be of assistance to you.
Jeff Kmiecik