Home › Forum › Ask A Member › Johnson a › Reply To: Johnson a
I suspect that the rope sheave screws should be the same because the flywheel and rope sheave size and shape is the same on an a-35 I have, which indicates to me that they would not have updated a design that they already had to tooling for. Since the a-25 was made before my a-35 and after the a, I would guess that rope sheave screws for that would work. I’m usually good at keeping track of all screws and whatnot, but this time I was trying to take to rope sheave off for a reason I cannot currently remember, and it came off less than smooth, causing 2 of the screws to fly. I found one and reassembled the rope sheave with the two that I had, but I was not able to find the other because it was dropped on the ground, which was filled with leaves and pine needles. I searched a while for it, but was not successful. I’ll have to be more careful next time…..
"Outboards seem to multiply exponentially..........I find that for every finished project, there are two more waiting to be completed."