Reply To: 1940 Johnson AT-10 Prop seal, Need one!

Home › Forum › Ask A Member › 1940 Johnson AT-10 Prop seal, Need one! › Reply To: 1940 Johnson AT-10 Prop seal, Need one!

September 16, 2025 at 5:11 pm #299916
TerryFeldt

    OK, I made a new leather gasket.  Still leaks a drop or two.  Maybe it will quit after it swells up.  It’s MUCH better, Thanks!

    Another issue, I now have a sever fuel leak out of the top of the carb.  It is where the float pin is.  Any suggestions?  I did recoat the float as suggested by an earlier post. Is there a diagram some where so I can see if I put it together correctly?

     

    Terry