why not just start with a good wash down with a strong spray of automotive disc cleaner …or carb cleaner followed with a strong air compressor blow job.
Wipe the points clean & set the points at .020 (the usual spread) on the high spot of the cam lobe. at the very least perfect or not do test the condensers with a analog VOM for a kick on the needle, opens or shorts. Some digital meters will test uf value but it is not a 100% guaranty. Condensers need to be test at high voltages for leaks !! see diag for a very basic test cct.
better yet build yourself a Mohat test box which will boost the commercial AC peaks up to about 270+ dc volts !
Joining AOMCI has priviledges 🙂
