Reply To: 6hp Mercury Kiekhaefer outboard

[JACQUES]

ph may have a small hose  leading to the outside world    just follow it and clear it out !

 

chat gpt …
On a Mercury Kiekhaefer 6 hp outboard (especially the older 1960s–1970s “single-cylinder” style models), the cooling-water indicator — often called the “pee hole” — isn’t always in the same obvious spot as on newer motors.

Here’s what you should know:

• Many older Mercury Kiekhaefer 6 hp models did not have an external telltale at all from the factory. Instead, the cooling water exited through the exhaust relief ports high up on the back of the midsection, just under the powerhead. You’d see water mist or spray mixed with exhaust there.
• If your motor has been modified or is a slightly newer design with a telltale, it’s usually a small hole on the starboard (right) side of the motor, just below the powerhead cover — often near the shift lever or cowling seam.
• If you don’t see a little round hole, then your motor’s “pee” function is happening
  • through those rectangular exhaust relief openings, and that’s completely normal for that era.

  If you want a modern-style pee stream for easier monitoring, many owners add a fitting to the thermostat housing or upper water jacket and run a small hose to the cowl side.

Joining AOMCI has priviledges 🙂