Reply To: Ruddertwin exhaust isues

Home › Forum › Ask A Member › Ruddertwin exhaust isues › Reply To: Ruddertwin exhaust isues

July 28, 2025 at 11:35 am #298591
RICHARD A. WHITE
Participant

    Lifetime Member

    More often than not, the leads have swollen outer casing, causing them to be cut by the end caps. This can be a bit of a pickle to correct as I believe it is a safe bet that the tar used to “seal” the components in the case are not good for human exposure. So be sure to wear gloves…

    http://www.richardsoutboardtools.com
    classicomctools@gmail.com