Reply To: 1947 Evinrude Sportsman 2hp model 4416

[JACQUES]

Mumbles… I have been using CHATGPT for interesting comments ..on anything….  here is one on condenser size for the 4416 2hp

 

what is the proper condenser size for a 1947 evinrude sportsman 2hp 4416

REPLY…

For a 1947 Evinrude Sportsman 2hp (model 4416), the correct condenser (capacitor) size is generally:

✅ Capacitance: 0.18 to 0.22 microfarads (µF)

✅ Voltage rating: At least 250V (AC) or 400V (DC)

✅ Mounting: Small cylindrical type, usually with a pigtail lead and ground tab

These engines use a simple magneto ignition system, and the condenser is used to suppress arcing at the points and help generate a strong spark.

 

🔧 Interchangeable Condenser Options

If you’re replacing it and can’t find the exact original part, you can use:

• Sierra 18-5198
• OMC/Johnson/Evinrude part # 580321
• Or an old-style Kohler or Tecumseh small engine condenser in the same µF range

These are compatible with many vintage magneto systems. Just make sure the mounting and lead wire can be adapted to your breaker plate.

 

⚠️ Tips:

• Always replace points and condenser together if one is bad.
• Check armature plate insulation and wire condition.
• Some reproduction ignition tune-up kits are still available online and through vintage outboard forums or suppliers.

 

Joining AOMCI has priviledges 🙂