Reply To: CD12 strange cooling issue

[JACQUES]

the ph has an incoming  water passage at the upper end of the   water tube.     The water  flow may or may not be distributed by the fancy gasket when installed and doing it’s thing  but see if you can establish the cooling routes  into  sections of the PH    and  pump water in and look at the output water ports. One certainly dumps water in the exhaust cavity.

Once you have established the flow routes  and pumped in water  you will see if the ” inflow” looks restricted from exiting the PH… indicating  internal blockage blockage.

 

 

 

water should flow out where it normally dumps the

Joining AOMCI has priviledges 🙂