Re: 1950 Speeditwin Carburetor Leaking Fuel

Home › Forum › Ask A Member › 1950 Speeditwin Carburetor Leaking Fuel › Re: 1950 Speeditwin Carburetor Leaking Fuel

March 3, 2016 at 2:35 pm #32841
viking66
Participant

    Thanks for the responses.

    I set the mag handle to close to where it says start on the hood. I have the High speed wheel set to start as well, and the speed control handle. The Low Speed jet is 1.5 turns out as stated in the manual.

    If I try to bring it to a lower idle it dies at this point.

    Correct, no load in the barrel, I have the prop off so water doesn’t fly all ober the place.