Reply To: Sears/McCulloch 7.5 hp outboard replacement of coils riveted not screwed

Home › Forum › Ask A Member › Sears/McCulloch 7.5 hp outboard replacement of coils riveted not screwed › Reply To: Sears/McCulloch 7.5 hp outboard replacement of coils riveted not screwed

May 28, 2025 at 12:17 pm #296850
CHUCK
Participant

    US MEMBER PAY BY CHECK

    It’s a bit unusual for both coils to be bad.  Possible of course.  You should thoroughly check other possible causes for no spark;  condensors, dirty points, bad wire to plug etc.

    The coils themselves can be removed from the laminates.  The laminates are riveted on your particular motor but you can still swap the coils themselves.

    LOTS of part motors around;  you should be able to find replacement ignition parts.

    Can you post a picture of your mag plate?