Now that I have spark, I am onto the carb. The old gaskets are looking reasonable, came off in one piece. I figured that I should preserve their dimensions anyway. So scanned them, traced them. Attaching it here in case someone else needs them.
These are for the Tillotson carb AC-1C. <=== NO, see bottom of message please.
The png file is at 96 dpi, basically the rectangular gasket should be 3.5 inches wide after printing (cutting). The thickness of the original gaskets is ~1/32.
It looks like that I cannot attach the svg (vector) file, is there a way to upload it somehow? That is what one would need for a vinyl cutter.
Edit: I keep confusing the two old motors, these gaskets are for “the other one” that has a Tillotson AJ21A carb. Sorry about the confusion. I will make drawings for the AC-1C one as well.
Also, my old vinyl cutter could not cut through the 1/32 material, so I had to finish with a pair of scissors, felt like losing a battle 🙂 The outline does work and now I have new gaskets on the carb side.
