Home › Forum › Ask A Member › Fusing control wires on a 1966 Evinrude Speeditwin 28HP (28402 M) › Reply To: Fusing control wires on a 1966 Evinrude Speeditwin 28HP (28402 M)
April 16, 2025 at 7:20 am
#295467
OK, well just as a reference, the newer engines with the red plug used a 20 amp fuse. I would surely pay attention to Joe’s advice though about the solenoid. If problems persist, I would try to see which circuit is killing the fuse, the choke or the solenoid.
And yes, be sure that gearcase is buried deep in the water, water should be over the gearcase/exhaust hsg joint in order for the pump to work properly..