Home › Forum › Ask A Member › Water seems to not be flowing. 1964 28 HP Evinrude Speeditwin 28402M › Reply To: Water seems to not be flowing. 1964 28 HP Evinrude Speeditwin 28402M
Thank you Phil,
I’m going to do what I can to get the leg submerged more. Water is above the horizontal holes on the leg. I was searching the same exploded view drawing looking for a thermostat. I believe I have a 1957-8 carburetor on it so I agree I believe most parts transfer from the earlier 30 HP. One question about the water tube. (Not that I expect it to be common knowledge) I’m thinking I should install the water tube through the top of the Exhaust Housing Assembly? I’m not sure how the 30’s went together. It looked like the top of the tube was cut to allow install from the bottom. During assembly the water tube went into a hole more than 1½” but I’m uneasy because that engine was cooked. Pic is of my new old stock water tube and the one I used. I’m ordering that plate gasket so I can do that!