Reply To: Fusing control wires on a 1966 Evinrude Speeditwin 28HP (28402 M)

Home › Forum › Ask A Member › Fusing control wires on a 1966 Evinrude Speeditwin 28HP (28402 M) › Reply To: Fusing control wires on a 1966 Evinrude Speeditwin 28HP (28402 M)

April 15, 2025 at 2:11 pm #295429
Chris Koure
Participant

    US Member

    I’m not quite sure how to do that. The choke bellows are stiff and as a result I’m pushing the lower lever. (I just put a 10 amp fuse in and that is probably too big.) I’ll go back to the 5 amp and use the manual lever even though the 10amp works just to see if it blows again.

    Bigger question is how quick does the lower leg spit water? I made a duct tape cup around the exit and I’m seeing nothing. Granted it runs at best 15 seconds before it stalls.

    Thanks crosbyman, Chris