Home › Forum › Ask A Member › OMC condensers. What is the micro farad and working voltage? › Reply To: OMC condensers. What is the micro farad and working voltage?
Well I claim no fame. M.Mohat tested a bunch and .22uf was his conclusion ( see his testing & chart ) . As to the brown caps I ordered a bunch of them few years ago and you confirm they work likeI suspected being 600V + and sturdy. Going on memory …. I am pretty certain properly insulated the will fit inside old emptied out cap cans for solid mounting. Just drill a small hole on the bottom and weld one wire to the can for grounding. the other end can be extended a bit and insulated from the can and connected to the points . A dab of epoxy or “corona” silicon in the can will hold them in place. 🙂
m.Mohat preferred the ceramic stuff $$$ at 850V but they are very tiny to work with and solder. I got some cheap ones from amazon but never got around to installing them in a cap. can.
Joining AOMCI has priviledges 🙂