Reply To: 1963 Evinrude oil leak

[Meier71@yahoo.com]

NP, that’s what I thought you meant. It seems to have worked, thanks!

Now I have to figure out the steering on this thing.  It doesnt have a tiller, and was setup with a pulley system, which I think would be fine if the wheel was in the center and it ran down opposite sides of the boat. the helm is on the left and both cables run down the same side. So there is always slack in the middle between turning left and then going back right and vice versa. Anyone have any ideas?  I’m assuming I could just either buy or make a tiller as a last resort.