I give up, just what are you asking? It seems like you have the side connector unplugged from the motor and are checking continuity between the choke wire (disconnected from the choke) and the pin(s) at the disconnected disconnected motor side connector (not the boat-side connector). Obviously, there should be continuity at the choke pin, and no continuity to the remaining pins.
If I am reading you correctly and you are finding continuity to all the small pins under such conditions, II have to ask what are you using as a test instrument? I am guessing a digital multimeter using the Ohms test function. What Ohms test range do you have the meter set at?
If this is not correct, what is the motor doing/not doing and why are you testing it?
