Re: 58 Johnson 50hp V4-SL Rotten Cable Harness

Home › Forum › Ask A Member › 58 Johnson 50hp V4-SL Rotten Cable Harness › Re: 58 Johnson 50hp V4-SL Rotten Cable Harness

February 23, 2016 at 1:56 pm #32388
wiscoboater
Participant

    Making the harness is not that hard, it’s just tedious work. Go at it one wire at a time. For the outer sheath that all the wires go into I used an innertube from a bicycle. One of those thin tubes from like a 10 speed bike, 26" rim. The rubber works well and you end up with like a 5′ piece from 1 26" tube.