Reply To: 1928 Fastwin & Fleetwin Carb questions

[Buccaneer]

George, Thanks for the manual page! I’ll take a look at
the carbs later today and see if I can figure out what
suppose to be there, taking your print along.

The only spot I put in an 1/8″ pipe plug instead of the 5/16″ x 32 plug,
was on the carb bowl drain, where there was lots of “meat”.
I realized the dilemma with the plug with the threaded jet,
and made an aluminum plug with a 5/16 x 32 die. My brass
round stock was undersize, and I failed trying to make an oversized plug
on the lathe.

Thanks.

Prepare to be boarded!