I have a like – hate relationship with the aluminum brazing rod. I’m getting better but I still struggle. I’ve done several prop repairs. I made a lamp out of some junk Pal parts for a friend. The skag doesn’t look just right but its good enough for a lamp. The prop is on a Super 10 I did five years ago. I would think there is a fair amount of stress at the end of the prop. I ran almost 60 gal. of fuel through the motor that summer and then gave the motor to a friend. He doesn’t run it as much as I did but it still gets used a fair amount. I checked this year and it still on there. I did the hole in the gas tank twice. It came out OK but it leaked. I just used a sealer in the tank. When its polished out it wont show at all looking from one direction but it will from another. Decal covers most of it. Tubs
A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.