Home › Forum › Ask A Member › 1970 Evinrude 9.5hp › Reply To: 1970 Evinrude 9.5hp
July 14, 2024 at 7:47 am
#289134
if you just acquired it the best thing to do is :
- totally clean the carb
- check the pump filter
- pull the fw and check if coils original… replace if cracked along with capacitors and may as weell install new plu g wires/boots
- use 7mm copper strand wire or metallic no carbon fiber wires !
- clean up the points and adj to .20 new points are getting complaints on quality
- change gear oil & impeller .. look for water intrusion.
- check-adjust timing if need be
- keep vent open
- if fuel hosei old -gray it could be bad.
- check for connector air leaks
see utubes on carb job & timing
http://www.youtube.com/watch?v=ga1Cjymj6ms&feature=youtu.be
Joining AOMCI has priviledges 🙂