Reply To: ’60 Evinrude 10 hp Powerhead removal

Home › Forum › Ask A Member › ’60 Evinrude 10 hp Powerhead removal › Reply To: ’60 Evinrude 10 hp Powerhead removal

April 22, 2024 at 2:52 pm #287202
JACQUES
Participant

    loosen the nuts  & pull away the carb  from the intake as you  turn the nuts with your  fingers.  you almost have to work both sides  to wiggle the  carb body  away from the intake

    if the nust are to tight you can try  a drop of wd40

    and yes…….  take off the   silencer.     just a few more bolts nothing elaborate.  disconnect linkage/hoses where u need to

    Johnson QD carburator servicing – Recherche Google

    Joining AOMCI has priviledges 🙂