Reply To: 1932 Evinrude 413 fisherman

[beezer]

Thanks for the info. Been playing with it today I watched the video on youtube on the Elto Super A outboard and the timer is the same. I had been trying to set a gap on the points but it turns out that I needed to set the timer a little to the left of the center then set the pistons a little after top dead center and then adjust the points to where they just start to open thats when they fire. When doing that the motor fire right up. With the timer set at seven o’clock it idled great then moving the timer to the right the motor speeds right up. I guess you don’t need to worry about a certian gap thickness. When the timer is all the way to the left, 9 o’clock the points have a 50 thousands gap.  Thanks again