Baron: your 2G motor is correct with the steel tank. They made 2 kinds of 2G Vikings, one with the big cast tank and one with a rectangular steel tin tank with a tin front shroud. These 2 motors can be told apart by the front tank mounts. The steel tank version two front screw mounting holes are on top of the cylinders while the cast tank mounts are on the front of the cylinders. Only the pertinent screw holes in the cylinders are made that fit the correct tank used. So, if you see a 2G with no tank, you can tell which tank it needs by where the 2 front screw holes are located. The steel tank version does not show up in literature except it is mentioned in a factory service bulletin. Both motors use the same decals. The tin tank version “Viking” decal is mounted on the top of the tank at a 45 degree angle in the starboard rear corner, readable from the drivers seat.
