Reply To: 1953-54 25 horse evinrude

Home › Forum › Ask A Member › 1953-54 25 horse evinrude › Reply To: 1953-54 25 horse evinrude

February 14, 2024 at 2:16 pm #284930
JACQUES
Participant

    HV pins  to either primary is ok  if you get  4- 8kohms   (use a  scale above   0-10kohms  if  using  a analog VOM)

    if  primaries between themselves  =>     0-1 ohm    coils should be OK

    otherwise the plug wire is open,  baddly screwed in the HV screw pin  or   boot end spring is corroded .

     

    in any  event  if not done     you may as well insall new solid metallic  plug wires     no carbon  high resistance stuff !

    Joining AOMCI has priviledges 🙂