Try this test. Gap the plug at .025
Squirt some gas into the cylinder.
Pull the motor over 5 or 6 times
to get a good fuel – air ratio.
Put the plug in.
Mag lever pointing to around 4 O’clock.
See if the motor starts in 2 or 3 pulls.
If it does this magneto design is
putting out all the spark it can but
its adequate for your motor to run.
Tubs
.
Thanks, Tubs. I have been doing this once in awhile, already. First with a .025″ gap, then even smaller. The best I can get is an occasional pop.
Long live American manufacturing!