Got to spend some time on this motor.
The first repair I needed attempt was to make
the mounts for the coil cover. The two on the
cylinders took some time but went pretty well.
.
Getting the broken bolt out of the mount to the
block, not so much. I spent as much time on
it as I did making the ones for the cylinders
and still failed.
First I tried a left-handed drill bit. Of coarse
the bit always moves off center for me.
Then an easy out. Last resort – drill & tap.
What’s left seem to be well attached.
As my hole was off center its probably best
that what’s left didn’t come out. I’m leaving it.
No wings for Clarence this time Bob.
Tubs.
A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.