Re: 1966 FD 20 troubles

Home › Forum › Ask A Member › 1966 FD 20 troubles › Re: 1966 FD 20 troubles

February 12, 2016 at 11:54 pm #31845
chris-p
Participant

    Looks like the head gasket failed around the lower cylinder ring? Or is it my eyes.

    I would check the bore while I had it open, ensure the rings are free and not stuck.

    Then check the head to be true, straighten by sanding in figure 8s on emory on plate glass.

    Install new head gasket, and torque to spec.

    Then re test.