Re: Gear Case Sealant

[John]

I guess my pill cutter is too "upscale" – – – it has a guard to keep little fingers
out of it – – plus, a plastic piece to hold the pill still and centered ….. so that does not work.
Edit: I drilled a 1/8" hole into each side, but, even then, it is the same "chop"
style of cut I have been doing with the X-Acto blade and single edge blade.
And, the cutter blade does not bottom out, it is like 1/32" from touching the bottom.
so that does not work for me.
The "roll-n-cut" works for me.

I did learn one thing while doing this – – –
the red or orange seal is Food Grade for mixers, etc.
the black is not food grade, mechanical only, away from food processing equipment.

so, I guess your gear oil is safe from outside contaminants ?