Reply To: AOMCI decals for barrels

Home › Forum › Ask A Member › AOMCI decals for barrels › Reply To: AOMCI decals for barrels

October 4, 2023 at 8:42 pm #281336
jeff-register
Participant

    I had a metal”running” bbl for testing too. I changed to plastic laminated wood to mount the motor because of the rust I had in the water plus much lighter to move. I used two pieces of 3/4″ plywood on either side & stove bolts/fender washers, 1/4″ to secure. Ran up to 20 horsepower motors. Don’t know of any stickers but great idea!!!

    Good luck.