Home › Forum › Ask A Member › Am I Running On Only 1 Cylinder? Opinions? ’49 Sea King › Reply To: Am I Running On Only 1 Cylinder? Opinions? ’49 Sea King

#281285
John Gragg
Participant

    1.) I will check my place for the Aero Gloss tomorrow. I may have a fuel line compression gland.

    2.) With the same clips that the cork float used. Did you sand the cone off the Sierra float and try

    to match the length to the cork one? There are grooves in the needle to be used for the clips. They

    line up to where the bottom and top of the float contact the needle.

    3.) A nice new cork float will work just fine for testing.

    4.) You can buy the proper packing from the same place you got the Sierra float. I use thick o-rings.

    Take your HS needle to the hardware store and match them up. Remember the thicker o-rings work

    better. I put 3 or 4 of them on the needle then screw it in. The tension nut will compress the o-rings.

    Yes that could be your problem. If it is loose that is no good. It will leak.

    5.) Anything is possible. You have identified problems but still decided to test run anyway? Guess what?

    Those problems are probably why your Sea King is running crappy. Fix the known problems. Then test,

    test, test!!!

    Carb-Parts-1

     

     

    Are you saying the Sierra float has enough meat in the cone to allow me to sand it down to the same height as the original cork float?

    If so, easy peesy.

    If not, I’m making new cork floats today. No biggie…

    Funny thing about ‘known problems’, you don’t know you have them until you ‘test’, right? I did not know anything, and still don’t, regarding a vacuum leak. Until I resolve my float problem I won’t know anything for sure.

    Also, prior to testing I changed the HS needle to the one that will accept the removable knob. So that is another variable in the equation.

    I have already tried o-rings, but ended up with a needle that would not move. I just bought an assortment that I will pick from and see if I can come up with a combination that works.

    Did you note the size and quantity of o-rings you used for yours? That would be helpful information.

    Thanks,

    Best Regards,

    John Gragg
    RIverside, CA

    Just starting in the hobby, please be patient.

    48 Sea King 5hp GG9014A. Sold
    49 Sea King 5hp GG9014A
    48 Johnson TD20. Sold
    49 Johnson TD20. Sold
    54 Johnson QD15. Sold
    55 Johnson CD12. Sold
    57 Johnson RJE-19M
    57 Johnson RDE-19