Home › Forum › Ask A Member › Evinrude 3602E (folding lower unit) lower unit removal. › Reply To: Evinrude 3602E (folding lower unit) lower unit removal.
September 29, 2023 at 4:17 pm
#281110
Hello,
Sorry for the late response. I was able to get the drive shaft out of the powerhead. The motor was seized but I was able to free it after a couple days of letting some penetrating oil soak in the cylinders. Then I was able to pull the shaft out of the powerhead by aligning the roll pin in the slot like I was taught how to in this thread. But, before I knew how to get the shaft out, I might have bent the shaft?? Made a stupid mistake ( I told Frank about it in this thread). But I pretty sure it’s fine. Thank you for the advice!!
Best,
Todd