Reply To: Update A-35 Flywheel Removal

[JOSEPH BRINCAT]

The knocker that you pictured looks like it should work OK, except that I would use a much shorter bolt, because, unless you are really good with the hammer that long bolt would tend to exert a sideways force, maybe even enough to damage the crankshaft thread. Consider that you only have half a nut length engaged with the thread. Be sure that the hammer blow is “square on”.

As for the “loosen the mag plate” thing, where did that advice come from? the mag plate need not be loosened, it is not attached to the flywheel and will remain in place. UNLESS, your proposed support system extends enough inward to actual engage the mag plate. Ideally the support system only catches the lower edge of the flywheel, or if you have a friend with really strong hands able to hold the motor up by the flywheel.

And DO NOT use a gear puller, you will damage the flywheel.

Joe B