Reply To: Freezing lower unit

[bob-d]

Dave, good thought about the JB Weld. I am going to try that on the ice damaged case.
On my replacement case I’m just going to pull it off at the end of the season, and store it in a heated area. A bit of a hassle but I guess the safest solution.

Don, although you can probably bolt up a complete 33 case to a 28, it doesn’t look as the internals are interchangeable.
Especially looking at the pinion gear area. 28 on left, 33 on right. So I don’t believe a bare 33 case would have worked in my case.
Again hard to tell exactly without both cases in front of you.
Thank again,
Bob D