Home › Forum › Ask A Member › New guy, new motor. › Re: New guy, new motor.
Well, first off, welcome to the group. You will find that the folks here are most helpful in assisting you to get that motor running. From what I can see your motor looks like it’s in pretty good condition. That vintage Johnson motor is normally very reliable, you should find that the ignition coil is good, clean, clean the points (set at .020) and see if you have spark. The condenser may have to be changed as they deteriorate with age, about any .22 uf capacitor will work. That motor has a plunger water pump, be sure that the check balls are not stuck shut or it will not pump water. Clean the fuel system thoroughly, from tank all the way thru to the carb. The tank, it looks pretty nice from this view!
I’m sure that guys with more specific knowledge of the J75 will be checking in with more info.
That’s a real nice stand that you made, knock down design.. I suspect that many guys here would like one like that.
And finally, where are you located? check the "upcoming events" page here and come out to one of the local meets, that’s where you will find parts, info, help and friends.
Joe B