Reply To: Newly acquired Johnson Jw-10 needs Carb Rebuild at least

Home › Forum › Ask A Member › Newly acquired Johnson Jw-10 needs Carb Rebuild at least › Reply To: Newly acquired Johnson Jw-10 needs Carb Rebuild at least

August 31, 2023 at 12:42 pm #279988
CHUCK
Participant

    US MEMBER PAY BY CHECK
    Michael Gehrling wrote:

    SeaKay12,

    Thank you for the information.  I have not pulled the flywheel as of yet as the center nut is not cooperating.  From what I can see, it appears that the points and condensers are new, what brand I cannot tell.  I will try a bigger impact wrench on the center nut but just to be sure, to remove it is counterclockwise?

    Thank you also for the picture of the two dots.  I checked and this is the point that the cam starts moving the carburetor linkage.  On the word “SLOW” I cannot get the throttle into the letter W as she will just get rough and stall.

    Best regards,

    Mike

    Yes Counterclockwise.  You really should use an appropriate puller.  If you need advise regarding that please ask.