Reply To: scintilla coil substitution

[Buccaneer]

Joe, There’s no way to remove the laminations from those military
Scintilla coils that I know of, without destroying them.
I’ve used those coils two or three times for coil swaps, and machining
the original laminations from the original coil to fit the Military coil.
The last time was a “bugger” getting the lams out.
I cut one end of the lams off near the coil, drilled a hole down the
center, most of the way through, using the milling machine,
and ran a punch through and hammered
away. It did not go well, but in the end, I had good spark.

Prepare to be boarded!