Reply To: Johnson LT 37

Home › Forum › Ask A Member › Johnson LT 37 › Reply To: Johnson LT 37

July 14, 2023 at 6:11 pm #278050
Buccaneer
Participant

    US Member
    Boonie wrote:

    How do I test this?

    Test with an ohm meter across the two plug wire terminals at the
    coil (secondary). Not sure of the exact reading to expect on this
    coil, but think between 4k to 8k ohms.

    To test the primary windings, connect the ohm meter to the small wire
    that goes to the points, and the other small ground wire. Usually
    the primary will only be one or two ohms.

    Prepare to be boarded!