Super 10 start easily when everything is as it should be
Sure you have spark?
Take out plugs, if wet, shake the fuel out of them,
pull the motor over 10 to 12 times, put plugs back in,
mag lever on start, try it again. You should get something.
If you do it’s flooded.
Close the high speed mixture screw some.
Plugs dry? Squirt some fuel in the cylinders, pull the
motor over a few times, put plugs back in. You should
get something. If you do open the high speed mixture
screw some.
If you don’t get anything at all I would suspect upper
and lower crankshaft seals need replaced.
Seals and gaskets are available from Joe Poole at
Ferguson Poole Marine.
Link – http://www.fergusonpoolemarine.com/
I suggest you wait to see what others may have to offer
and use your best judgement.
Tubs.
A "Boathouse Repair" is one thats done without having tools or the skills to do it properly.